Lubricants & Penetrants

• Quickly releases rusted and corroded bolts, nuts, hinges and other frozen components.
• Extremely high solvency, low surface tension
• Enhanced penetration, lubrication
• Outperforms the competition in independent lab tests.
• Penetrates faster and deeper than most other similar products in the market place.
• Meets the California Air Resources Board (CARB) and Ozone Transport Commission (OTC),VOC regulatory guidelines.
• NSF registered category H2 #138554 (aerosol)
• Inverta Spray Valve

New Smart Straw features a permanently attached straw that sprays two ways. Simply flip it up for a precision stream and down for a regular spray action.

• 12 oz

• Industrial size 16 oz

• Loosens rusted or frozen parts
• Inverta Spray Valve allows one to spray in an upright or inverted position

• Meets or exceeds: MIL-C-23411A, para. 3.1.1, 3.2-3.11
• Rolls-Royce Overhaul Process 340
• Dry, thin lubricating film
• Fast-acting penetration
• Short term, light, corrosion resistant barrier
• Nonconductive
• Used worldwide in aviation
• Resists oil, dust and dirt build-up
• Displaces moisture
• Loosens rusted or frozen parts
• Ideal for delicate mechanisms
• Safe on paint and most plastics

• An excellent protective coating for hand and machine tools, parts and equipment
• Meets or exceeds: MIL-C-16173D Grade 3 Class I, para. 3.3, 3.4, 3.7-3.11 , MIL-C-81309D Type III, para. 3.4-3.5
• Reduces wear caused by friction and corrosion • Loosens rusted or frozen parts
• Nonconductive
• Spray in an upright or inverted position
• Provides up to one year of corrosion protection
• Safe on paint and most plastics

• High-performance lubricant with PTFE additives
• Penetrates and protects metal against rust and corrosion
• Inverta Spray Valve allows one to spray in an upright or inverted position
• Safe to use on most surfaces

• Does not contain silicone or chlorinated solvents
• Provides excellent lubrication
• Excellent for high-temperature applications up to 500°F (260°C)
• Dry, thin film won’t attract dust or dirt
• Ideal for releasing molded parts
• Nonflammable
• Safe on most surfaces
• USDA H2

• Colorless, thin film
• Low odor
• Nonstaining
• Excellent for releasing molded parts
• Nonflammable
• Noncorrosive

• Ideal for surfaces like rubber and plastics, where petroleum products cannot be used
• Eliminates sticking, binding and squeaking
• Meets USDA requirements for H1
• Ideal for rubber and plastic surfaces
• Does not contain chlorinated solvents

• Great for food processing and handling applications
• Meets or exceeds: FDA regulation 21 CFR 178.3570 for Incidental Food Contact
• Meets FDA regulation for incidental food contact
• Dry film will not attract dust or dirt
• Ideal for releasing molded parts
• Applications up to 500°F (260 °C)

• Registered #129000 for use in meat and poultry plants
• Safe on most surfaces
• USDA H1
• Meets FDA 21-CFR-178.3570
• Does not contain silicone

• Foaming action provides extra penetration and lubrication
• NSF Registered H1 (#132899)
• Oily, wet film extends chain life
• Nonflammable

• Fortified with molybdenum disulfide
• Deep penetration to the core of wire ropes
• Effective under extreme temperature and pressure ranges
• Increases the life of chains and wire ropes
• Reduces wear caused by friction and corrosion
• High adhesion

• Ideal for break-in lubrication applications and for preventing sliding or threaded parts from seizing together
• Fortified with molybdenum disulfide
• For assembly and break-in lubrication
• Prevents seizure of parts
• Works under high temperatures – 842°F (450°C) and pressures – 100,000 psi (6890 Bars)
• Provides a quick drying, thin film

• USDA rated Hz.
• Cleans, lubricates, penetrates and loosens corrosion