Crimping Tools

Super Crimp Series Tools are designed for the professional that insists on the best commercial grade full-cycle crimp tool available. The ergonomic progressive pivoting design provides maximum crimping force with reasonable handle pressure.

Fine blanked, high carbon steel construction provides a level of accuracy and performance usually reserved for MIL-SPEC tools. The 4100 series is manufactured in the US and is backed by over 100 years of quality craftsmanship.

Features:

• A multi-purpose frame manufactured to exacting specifications to accept interchangeable dies.
• Molded grips and an easy reach frame to minimize user fatigue.
• Reamed bearing holes, centerless ground pivots and heat treated working components.
• Positive ratcheting assembly with emergency release.
• Conservatively rated tool life of 50,000 cycles.
• Crimps that meet or exceed U.L. tensile requirements.
• Interlocking die sets that are easily interchanged with mounting screws for most product applications.

• D100 die set for 22–10 AWG insulated terminals and splices
• Colors: red, blue and yellow
• Patented ergonomic design makes this tool easy and comfortable to use
• Lowest possible handle forces required
• High quality construction with tight tolerance
• Superior crimp die design insures the highest quality crimp results
• High strength through-hardened alloy steel and precision manufacturing
• Guaranteed for 50,000 cycles
• Precise eccentric adjustment for consistent performance for life of tool

Controlled cycle ratchet crimp tool designed to crimp both the conductor and strain relief portion of size 22–10 insulated terminals and splices in one closure. Two (2) crimp cavities.

Features:

• Ergonomically correct
• 3 color-coded die/nest for insulation terminals
• 22–10 gauge

The PRO-CRIMPER III Hand Crimping Tool is a “Commercial” grade
hand tool and is designed primarily for field installation, repair,
maintenance work, or prototyping in industrial, commercial, or
institutional applications.

• 22-10 AWG Crimp Range
• For insulated terminals and splices

Hand Tool (Plier-Type) for installing A, B, C, PT non-insulated terminals and splices, includes wire cutter.

• 22–10 AWG Crimp Range

Hand Tool (Plier-Type) for installing A, B, C: AB, PT, RA,RB, RC insulated and non-insulated terminal and splices, includes wire cutter and stripper.

• 22–10 AWG Crimp Range

• Accommodates wire from No. 10 to 22 AWG.
•  Specially hardened wire cutter in nose.
•  Tapered nose design for working in confined spaces.
• Crimping die marked for solderless terminals and connectors.
• Plastic-dipped, cushioned handles for comfort.
• Hot-riveted joint for smooth action and no handle wobble.

• Combination Crimping, Stripping and Screw Cutting Tool
• For insulated and non-insulated terminals, 22–10 gauge crimp range (also has ignition terminal crimp nest).

Features

• Crimps bare or insulated terminals and splices on 22–10 AWG wire
• 9-3/4 in.
• Knife-to-anvil blades never need sharpening
• Excellent leverage for easy crimping and cutting
• Drop-forged, high carbon steel construction
• Vinyl coated handle grips

The most versatile heavy-duty tool 3M has ever offered. It is made of 1.40inch (35,5 mm) high-strength, heat-treated carbon steel.

High carbon, heat-treated steel crimping tool that has a unique design that provides a high strength/weight ratio that crimps a broad range of 22–10 AWG terminals and connectors.

Designed for heat shrink terminals.

• 4 crimp nests—8 AWG ,12–10 AWG, 16–14 AWG, 22–18 AWG
• Ensures uniform crimp termination regrdless of user
• Release switch if terminal or wire is inserted improperly
• High quality, economical tool
• Can also be used for standard insulated terminals. Does not do double crimps in one stroke

Designed for heat shrink terminals.

• 3 crimp nests: 12–10 AWG, 16–14 AWG, 22–18 AWG
• Can also be used for standard insulated terminals. Does not do double crimps in one stroke

• Insulated Ratchet Crimping Tool.
• 22 – 14 gauge crimp range for insulated terminals.
• Designed to crimp to MIL-T-7928 standards.

26–12 gauge, for sealed crimp termination sleeve connectors.

The most commonly used tool for solid contacts, crimps a wide range of contact sizes with no need to change out dies or locators. It provides a symmetrical four indent crimp, is compact and easy-to-use for field service, yet sturdy and reliable enough for low volume production.

4-Indent Crimping of Closed-Barrel Deutsch Contacts

.093” Pin Diameter Terminals, Standard KK Crimp Terminals for .156” Center KK Housings, Series #1189/1190, Series #1380/1381, Series #2478

.062” Pin Diameter Terminals, Mini KK Terminals for .100” Center KK Housings, Standard KK Crimp Terminals for .156” Center KK Housings, Series #1433/1434, Series #1560/1561,
Series #1854/1855, Series #2759, Series #2578

Crimps .093” Pin Diameter Terminals

Crimps .062” Pin Diameter Terminals

Crimps Weather Pack terminal and seal in one cycle. Features two double cavities, an orientation block and a ratchet mechanism to ensure that each crimp cycle is completed. Factory calibrated to be used only with Weather Pack terminals and seals. Wire range 20–14.

Wire range 20–14 gauge maximum. Two crimping cavities and three seal-clinching cavities cover a wide variety of applications including Weather Pack and Metri-Pack. Will clinch seals on Metri-Pack 150, 280, 480 and 630 Series. Ratchet mechanism ensures completion of crimp cycle.

This specialty tool is designed to crimp sealed Metri-Pack 280 terminals in wire sizes 12 and 10, along with 12-gauge Weather Pack terminals. It can be used to crimp most open-barrel terminals in the 12–10 AWG wire range. The ratchet mechanism ensures that each crimp cycle is completed.

Our RT18 crimps Weather Pack terminals and seals, and the most popular sealed Metri-Pack 150 and 280 Series. Its compact, low-cost parallel jaw design eliminates terminal rocking.

• Crimps a wide variety of open barrel contacts in medium size wire ranges.
• Crimps conductor and insulation portion of contacts in seperate cavities.Tool must be closed twice to complete termination.
• Insulation crimps are “B” type and are produced in two cavities.: A 18–14 AWG and B 24–20 AWG.
• Conductor crimps are “B” type and are produced in three cavities: C 16–14 AWG, D 20–18 AWG and E 24–22 AWG.

• Crimps wire tip ferrules with and without plastic insulator collar to metric standards
• Crimps are produced in five cavities: 0.25–0.5 mm², 0.75–1.5 mm², 4.0 mm², and 6.0 mm² (28–10 AWG)

• Crimps wire tip ferrules with and without plastic insulator collar to metric standards
• For contacts, 16 mm²–6 mm² (10–6 AWG)

Manual tool for Crimping non-insulated 8AWG thru 4/0 Terminals

Professional heavy duty crimp tool is engineered to provide the most complete crimp on all major brands of connectors. The diamond shaped rotating dies produce a solid mass of copper with every crimp leaving a secure low resistance connection.
Features Include:
• 6 GA. – 250 MCM Range one tool conveniently accommodates popular sizes
• Diamond-Shaped Crimp completely compresses cable to form solid mass assuring low resistance connection
• Compound Action exerts five tons of force for complete crimps
• Built-in Dies no detached dies to purchase or lose
• Rotating Dies quickly adjust setting to accommodate various terminals and lugs
• Comfortable Grip improves your grip and eases hand fatigue

For battery terminals and flared  non- insulated lugs, 4 – 4/0 ga., adjustable/dial-in gauge settings.

For insulated Lugs.

• 4 Crimp nests
• 8–2 AWG Crimp Range

• Use with #6 AWG to 4/0 aluminum and #8 AWG to 250 KCMIL copper wires
• Adjustable crimp nests with clearly marked gauges
• Rugged cast steel construction for durability

Heavy Duty Hand Tool for Crimping D, E, F, G Non-insulated Terminals

• 8–2 AWG Crimp Range

Comfort Crimp Ergonomic Design, Shure-Stake Ratchet, Rotating Die Wheel, Color-coded Die Nests, Die Code Embossment.

• 8–2 AWG Crimp range

• Ignition Terminal Crimping and Wire Cutting Tool
• Crimps common spark plug and distributor terminals
• 22–10 gauge