Electrical Testing Equipment

Designed by electricians. Engineered by Fluke. Designed for easy one-hand operation, the Fluke 114 true-rms digital multimeter is the perfect troubleshooting tool for “go/no go testing. Its AutoVolt capability automatically switches to measure AC or DC voltage, whichever is present. The LoZ function helps identify so-called “ghost voltage and prevent false readings. The Fluke 114 displays true-rms voltage and current readings with 6000 count resolution, and tests frequency, continuity and resistance. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes easy. Fluke 114 multimeters are independently tested for safe use in CAT III 600V environments.

The Fluke 116 digital multimeter delivers the capabilities professionals demand to troubleshoot and repair HVAC (heating, ventilation and air conditioning) systems. It has everything you need in an HVAC meter, including temperature and microamp measurements to help you quickly troubleshoot problems with HVAC equipment and flame sensors. The Fluke 116 comes with the Fluke 80BK-A integrated DMM temperature probe. The microamp function allows flame sensor measurement down to 0.1 microamps. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 116 also has a large white LED backlight for work in poorly lit areas. It measures resistance, continuity, frequency, and capacitance and provides Min/Max/Average readings with elapsed time to record signal fluctuations. Fluke 116 multimeters are independently tested for safe use in CAT III 600V environments.

The Fluke 374 True-rms Clamp Metercan read up to 600 V and 600 A in both ac and dc modes. Additionally, the 374 is compatible with the new iFlex flexible current probe (sold separately), which increases the measurement range to 2500 A ac and provides increased display flexibility, and improved wire access. Safety Conformance EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV

For professional technicians worldwide there is one preferred solution: the precision, reliability and ease of use they find in Fluke 170 Series True RMS digital multimeters. This is the industry standard, with all the features you need to troubleshoot and repair so many problems in electrical and electronic systems. Fluke 170 Series digital multimeters give you True RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09% basic accuracy, a digital display with analog bar graph and backlight.

Fluke 170 series multimeters are independently tested for safe use in CAT IV 600V/CAT III 1000V environments.

New diagnostic functionality for maximizing productivity in the plant. The new 289 is the next generation high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime. Let the new 289 be your watchdog for systems or processes while you are off solving other problems.

The T+PRO Electrical Testers offer all the functionality that electricians look for in volt meters and voltage and continuity testers: Both have three ways to detect ac/dc voltage: light, sound, and vibration Both offer the added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight The T+PRO Electrical Tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 KOhms, as well as a backlit LCD display for easier viewing Safer than traditional solenoid testers: Solid-state tester design CAT IV 600 V, CAT III 1000 V rated Complies with NFPA 70E*

The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

• Equipped with alligator clip and metal probe.
• Test bulb illuminates inside non-conductive handle.
• Compatible with 6-12 volt circuits.

Electrical DMM Test Lead Kit offers a complete assortment of modular test leads and probes compatible with all Fluke DMMs.

• Includes a heavy-duty clear vinyl pouch and IEC 1010 Compliant test accessories.
• One-piece safety test leads with screw-on clips and clippers.
•  Surface Mounted Device (SMD) prod with small tip for fine pitch devices.
• Extends to 2.5″ and is insulated.
• DC to 100 MHz x 1 and x 10 switchable monolithic oscilloscope probe with accessories.
• Compatible with FLUKE ® 10, 70, 80 Series DMM.
• CONTENTS: Oscilloscope probe(600V)manufacture din compliance with MIL-1-45208A •Scope accessory kit • Test Lead (red & black) Flexible silicone • Variable length test prod lead 48″ to shrouded banana (red & black) 1000V • Insulated plug-on test prod (red & black) 1000V • Insulated right angle plunger jaw clip(red & black)1000V • Insulated right angle plunger hook clip(red & black)1000V •Female BNC-to-double banana plug adapter • Insulated banana jack to standard banana plug(red & black)1000V • Insulated spade lug(red & black).

Bench DMM’s Meter Mate Kit has compatible replacement leads for all Agilent 34000 Series digital multimeters.

• Includes a tri-fold pouch and IEC 1010 Compliant test accessories.
• U.L.-listed for safe operation to 1,000V.
• Heavy-duty nylon pouch with pockets.
• Compatible with FLUKE ® 10, 70, 80 Series DMM.
• CONTENTS: Test lead (red & black) Flexible Silicone 60″, 1000V • Insulated plug-on shrouded alligator (red & black) 1000V • Insulated right angle plunger jaw clip (red & black) 1000V • Insulated spade lug(red & black) • Insulated plug-on test prod with cage spring banana tip(red & black)1000V • Insulated banana jack to standard banana plug(red & black)1000V.

• One pair (red, black) of comfort grip probes 48 inches (1.22 meter)
• PVC insulated test leads with right-angle shrouded banana plugs
• Recommended for general purpose measurements
• CAT IV 600 V, CAT III 1000 V, 10 A rating. CSA listed.

• One pair each of TL22 silicone test leads, AC20 heavy duty alligator clips and TP20 sharp industrial test probes
• CAT III 1000 V, 10 A rating.

The stainless steel probe is Teflon® insulated except for the working end to prevent unwanted contact with other components that may be in the way Material:

• Needle: stainless steel; Banana Plugs: nickel-plated brass; Housing: ABS
• Hook-up wire: #18 AWG (65/36) tinned copper with 90°C PVC insulation 
• Rating: 600V Category II, 20 Amps

Material: Banana plugs: nickel-plated brass body, nickel-plated beryllium copper spring.

• Hook up wire: #18 AWG, silicone insulator  
• Rating: 1000V, 20 Amps, IEC 1010 Compliant

Compatible with all shrouded, unshrouded, or retractable 0.16″ (4mm) banana plugs

• Material: Housing: nylon. Contact: nickel-plated brass Length: 3″ (76.2mm)
• Rating: 1000V, 20 Amps, IEC 1010 Compliant

Compatible with all shrouded, unshrouded, or retractable 0.16″ (4mm) banana plugs

• Material: Housing: nylon. Contact: nickel-plated beryllium copper
• Length: 4.60″ (116.84mm); the hook extends 0.41″ (10mm) when fully depressed
• Rating: 1000V, 15 Amps, IEC 1010 Compliant

Compatible with all shrouded, unshrouded, or retractable 0.16″ (4mm) banana plugs

• Material: Housing: nylon. Contact: nickel-plated steel Length: 5.26″ (133.6mm); the steel jaws extend 0.48″ (12mm) and open to 1″ (25mm)
• Rating: 1000V, 15 Amps, IEC 1010 Compliant

• Material: Banana plug: nickel-plated brass body, nickel-plated beryllium copper spring; Insulator: nylon
• Length: 2.61 in (66.3mm)
• Rating: 1000 V, 15 Amps (hands free)
• IEC 1010 Compliant

• Compatible with all shrouded, unshrouded, or retractable 0.16″ (4mm) banana plugs
• Jaw opens 0.75″ (19 mm) max
• Material: nickel-plated steel clip, glass-filled nylon housing
• Length: 3.23″ (82.04mm)
• Rating: 1000 V, 30 Amps, IEC 1010 Compliant

• Material: Banana Plug: nickel-plated brass; Insulator: nylon
• Length: 2.50″ (63.5mm)
• Rating: 1000 V, 15 Amps, IEC 1010 Compliant

• Material: Banana plug: nickel-plated brass body, nickel-plated phosphor bronze spring;
• Insulator: ABS Length: 1.08 in (27mm)
• Rating: 15 Amps

• 8-32 threaded barrel connection
• Jaw opens 0.31″ (7.9 mm) max
• Material: nickel-plated steel
• Length: 2.13″ (53.97mm)
• Rating: 10 Amps

• Compatible with all shrouded, unshrouded, or retractable 0.16″ (4mm) banana plugs Jaw opens 0.31″ (7.9 mm) max
• Material: nickel-plated steel clip; tenite acetate insulated handle
• Length: 2.34″ (59.53mm)
• Rating: 10 Amps

• Compatible with all shrouded, unshrouded, or retractable 0.16″ (4mm) banana plugs 6-40 screw connection
• Jaw opens 0.31″ (7.9 mm) max
• Material: nickel-plated steel
• Length: 1.97″ (50mm)
• Rating: 10 Amps

Protective flexible vinyl insulator for and AC60 & ATM128

• Material: PVC
• Length: 2.03″ (51.59mm)